Richard Dick
Top Contributor
It doesn't look right without uv, it's uneven and a weird greyishness. People will just think you've gotten dirty or using fake tan
-
TMuscle acknowledges the use of AAS (anabolic and androgenic steroids) POMs (prescription-only medicines) and other performance-enhancing substances in bodybuilding today. It aims to provide reliable information on their safe administration, side effects and dangers.
TMuscle does not approve or support the unlawful supply, possession or use of any drug.
Members may report and describe factually their experiences with AAS and brands of AAS and POMs.
Members may not offer to supply or facilitate the unlawful supply of AAS, POMS or other controlled drugs on TMuscle or its messaging systems.
First Cycle Melanotan 2
- Thread starter Allnattylol
- Start date
Penguin'sreturn
Full Member
FWIW I'm an admin for a site called Mellow Tan. Product has always been spot on, admin or not I wouldn't buy anything if there stuff was shite.
Think a few ppl have already mentioned here I wouldn't bother with a loading phase. Most recommend 10iu per day for 10 days then see how you are from there.
Before I ever used it I took extra precaution and only did 5iu cos because of the horror stories I'd heard about really bad sickness/nausea. If you don't want to load then I'd say 3 jabs per week of between 5-10iu will get you well on your way, plus this minimises any sides (I've never gotten the nausea from it personally, though I've never injected it at more than 10iu at a time)
Think a few ppl have already mentioned here I wouldn't bother with a loading phase. Most recommend 10iu per day for 10 days then see how you are from there.
Before I ever used it I took extra precaution and only did 5iu cos because of the horror stories I'd heard about really bad sickness/nausea. If you don't want to load then I'd say 3 jabs per week of between 5-10iu will get you well on your way, plus this minimises any sides (I've never gotten the nausea from it personally, though I've never injected it at more than 10iu at a time)
Robbie
Top Contributor
Dosing by iu really doesn’t mean anything if you don’t know how much liquid is in the vial...
Penguin'sreturn
Full Member
Lol, how on earth would you not know how much liquid is in the vial?
Nasal sprays are best mixed with 5ml for most accurate dosing, think it's saline solution he uses in that.
As for the injectable 2ml of sterile/bac water gives the most accurate dosing. Doesn't look like much when you reconstitute it but perhaps that's why some others have had shit experiences with it, if they're mixing it with say 5ml then the injectable is heavily watered down.
You can buy either premixed or buy the peptide and sterile water separately, this is what I do to make 100% sure 2ml goes into the vial to reconstitute it.
Robbie
Top Contributor
lol.
10iu means something completely different if you put 1ml or 2ml in.
So saying I use 10iu means nothing.
Same as saying I use 1ml of test a week.
Penguin'sreturn
Full Member
You clearly have no idea what you're talking about, Jesus Christ.
Mix the peptide with 2ml of sterile/bac water (as explained this equates to more accurate dosing). Then when solution is reconstituted you use an insulin syringe to draw up your dose. That could be 5iu, 10iu or any dose you personally want to use.
Clear enough? Really can't see how I can simplify that any further.
Penguin'sreturn
Full Member
I think I realise what you're saying now. 2ml seems to be the sweet spot for accurate dosing, I followed this by someone much more experienced than myself and it works brilliantly.
When I first used I put the whole 5ml ampoule in and it was weak as piss, did nothing. With 1ml I'm guessing it would be much stronger and then the sides like nausea would be really bad?
There's no scientific proof on dosing and reconstitution as to my knowledge it was banned in 2003 and no more research was put into it. You could get it on script only in Australia post 2003, though I have no idea if that's still the case.
All I'm doing is having my 2 cents. In my experience 2ml mixed deff works best, I shoot 5iu or 10 iu depending on where I'm at and it's given excellent results.
If others disagree and want to mix it with more or less bac water then by all means try it, I was just saying I've tried different mls in reconstitution. The guy gave me the 2ml instruction and I was sceptical at first as it's like half a vial. But low and behold it worked great for me, no sides at all, tanned very quickly and it even aided with acne I've had since I was a kid.
Suppose it comes down to a trusted supplier for the actual peptide.
Robbie
Top Contributor
My point was to recommend dosing in mg not iu. Because one person might use 1ml another 3ml. It also assumes the vial contains 10mg to start.
Knowing how .3mg of mt2 makes me feel, I hate to think what it would be like if I accidentally did 3 or 4 times that amount
Knowing how .3mg of mt2 makes me feel, I hate to think what it would be like if I accidentally did 3 or 4 times that amount
Proteinbrah
Top Contributor
The amount of water you add to the vial makes fuck all difference does it lol
You’d just draw more out to get the required dose in mg
Doesn’t make it a weaker product. As in less potent at doing what it does.
If you added 5ml then only used 10iu a jab, compared to adding 2ml then doing a 10iu jab, then of course the latter is going to give better tanning results! As you are injecting more actual MT2
This is basic math
You’d just draw more out to get the required dose in mg
Doesn’t make it a weaker product. As in less potent at doing what it does.
If you added 5ml then only used 10iu a jab, compared to adding 2ml then doing a 10iu jab, then of course the latter is going to give better tanning results! As you are injecting more actual MT2
This is basic math
Penguin'sreturn
Full Member
Only reporting off personal experience buddy. As said already tried with different amounts and I know from my experience which is better but each to their own
Reacher
Moderator
I always used to use 1ml of water to the 10mg MT2 powder.
then backload into a slin pin.
easy and convenient to see exactly size of each shot over 10 days.
Worked ok for me, results always what I hoped for.
Give it a couple of days and the use sunbed eod or more if wanted.
Would tan without sunbed but it deffo gives better results with sunbed use.
MT tanning always looks like you've used MT though, doesn't have the same look as a natural tan. It brings out dark skin/ freckle specs on me, darkens moles etc.
then backload into a slin pin.
easy and convenient to see exactly size of each shot over 10 days.
Worked ok for me, results always what I hoped for.
Give it a couple of days and the use sunbed eod or more if wanted.
Would tan without sunbed but it deffo gives better results with sunbed use.
MT tanning always looks like you've used MT though, doesn't have the same look as a natural tan. It brings out dark skin/ freckle specs on me, darkens moles etc.
Richard Dick
Top Contributor
I wasn't sure how much you meant by 10iu either tbh. I only dose mine with 1ml of water, so would my 10iu would have been double yours
Richard Dick
Top Contributor
Weird.
Weird. Am I the only one that doses 1mg and above? I've used different suppliers, and same ones other people use, so I don't think it's underdosed product. Maybe it's because I'm naturally pale as fuck it doesn't affect me as much.
Proteinbrah
Top Contributor
1mg would have me sick as a dog, raging hard on and achy legs
Last time I used, (been years I think) I would load with .5mg then maintain on half that
Everyone’s different though, do you not get any sides off that dose?
Last edited:
Reacher
Moderator
nah, me too.
1mg per day over ten days or 2mg for 5days is pretty much how I've used it in 1ml of bac water.
didnt really get the nausea etc
bit of increased libido